A couple questions:
Does this issue effect WIN7 machines?
I am still at 14.0 R11. If WIN7 is effected, will I get an update to 14.0 R12 which has this issue, then have to wait for the "fix"? Or?
Every1 will get the update in due course. With partners such as ISPs and PC manufactures controlling when upgrades/patches are delivered there is usually several versions of the program around at any time.
2 Win 7 users and 3 win 8.1 users rest win 10.
My Chrome did hang again. At the moment of hang ClientAnalyticsService consumed just 2.4 MBytes of RAM.
Obviously ClientAnalyticsService was enabled. McAfee engine version: 2879.0 (2/3/2017). Update time of the newest file in C:\Program Files\Common Files\McAfee\ClientAnalytics folder: 01/26/2017. Probably this is the date I last time reinstall McAfee.
> something that causes this big a memory leak
Probably the memory leak is not the major reason of the misbehavior. It is just a side effect of another issue.
> would have seen a code rollback
I believe the event of interest was the MS Windows update, which triggered the issue on some computers. So it doesn't make sense to perform McAfee code rollback.
Hello. Today February the 4th, I am starting having the same problem. I have two computes, with the same McAfee version: Total Protection 14.0 R12 dated on January 31st 2017 as per this details:
Security Center compilation 15.3.3061 January 31st 2017
Antivirus and Antispyware 19.0.3060 compilation February 3th 2017
Firewall compilation 184.108.40.206 January 31st 2017
WebADvisor compilation 220.127.116.11
Anti-Spam compilation 16.0.3035 January 31st 2017 and last content update on February 4th 2017
Parental controls compilation 17.0.3038 January 31st 2017
File Lock compilation 6.0.3031 January 31st 2017
QuickClean and Shredder compilation 15.0.3033 January 31st 2017
Vulnerability scanner compilation 5.0.3053 January 31st 2017
In one of the computers I have the same issue with AnalyticsSDK process. But I cannot kill the process. And disabling the ClientAnalyticsService and rebooting does not works either. ClientAnalyticsService component installed is:
I have no Internet connection at all, any explorer and the system itself. I can not run mvt. Anything related to McAfee software goes far too slow, the rest of the software works fine, despite that process is making a high use of CPU. There is no way to open the console, unistall....
I need help to move on, considering that I do not have Internet connection in that computer, as there is on way I can work. I can send a dmp file of the process I have just created.
see my post #197 to someone else having this problem which I've seen on 2 different machines. McAfee has not acknowledged what's going on with this and if it's a side affect of this problem or yet another. But apparently it's hitting more and more users as well.
Just like you, my pc was locked out of everything on the internet side of the firewall (could get to local machines) and it didn't appear that anything getting to mcafee screens would work. They actually did, only you had to sometimes wait sometimes more than 10 minutes to get any response or for the dialogues to come up. If you can get to the configure firewall screen and disable it, that might get you in a state online. I found when I did get that, when I rebooted, I ended up blocked again.
My only solution was to uninstall mcafee, and reinstall a newly downloaded version. The uninstall itself will take a LONG time and you'll again think it's hung. After it uninstalls or as much as it will, use the cleanup tool (I referenced another post about it).
Good luck. I wish the moderators would find out more about this problem as well.... If there was a solution not involving uninstall, would be nice to know....
Thus from what you said:
Some time in the future I will get 14.0 R12. Then at some time after that I will get the fix. Thus there will be a time when I have 14.0 R12 without the "fix". Is this true?
If so, why doesn't Mcafee halt all future 14.0 R12 updates and replace them with ones that have the "fix" included?
Still happening after update. Most of the time no memory leak, but mem leak still happening after a while. AnalyticsSDK consumed 1.1GB memory and still hanged my Chrome.
My McAfee Setup:
McAfee LiveSafe 14.0 R12
Security Center 15.3.3061
Anti Virus and Anti Spyware 19.0.3060, Engine 2879 -- updated on 3 Feb 2017 (GMT+8)
Personal Firewall 16.0.3026
Web Advisor 18.104.22.168
Anti Spam 16.0.3035
Parental Controls 17.0.3038
QuickClean and Shredder 15.0.3033
Vulnerability Scanner 5.0.3035
Windows 10 Pro 64 bit.
PLEASE FIX THIS AS SOON AS POSSIBLE. THIS IS UNACCEPTABLE!!
Thanks for the info teapot - I'll look at your earlier referenced posts. Looks like an uninstall is in the works -just not sure there will be a reinstall.
i have been having the exact same issue you described for the last four days, numerous times a day regardless of the number of Chrome dabs open or usage.
one thing I have noticed is if I have Steam open before the lockup, Steam continues to function.
good luck everyone...
Probably bad form replying to my own post, but...
Uninstall, cleanup, and fresh reinstall took less then 50 minutes; rebooted before starting and after each step...
Total protection 14.0 R12
Security Center 15.3.3061
Anti-Virus & Anti-Spyware build 19.0.3060, Engine 2880.0
Personal Firewall 16.0.3026
Quick Clean & Shredder 15.0.3033
Vulnerability Scanner 5.0.3053
Windows 10, version 1607, os build 14393.693, 64 bit
New to the forums or need help finding your way around the forums? There's a whole hub of community resources to help you.
Thousands of customers use the McAfee Community for peer-to-peer and expert product support. Enjoy these benefits with a free membership: